Skip to main content

Clear Passage Performance Nasal Strips Opens Up The Nose



Clear Passage Performance Nasal Strips for Athletes, Tan, 28 Count | Instantly Improves Athletic Performance + Breathing, Relieves Nasal Congestion, Reduces Snoring

This worked as well and perhaps slightly better than a better known brand. I particularly liked that it stayed securely affixed throughout the night and left NO adhesive residue on my nose. I find that a problem with other brands as removal of the strip leaves the nose sticky with adhesive residue. I saw no adhesive residue on my nose. This works, it does provide some relief by opening the nose slightly as least as good as all other strips I have tried.  BTW I saw no improvement in my athletic prowess. LOL

From the vendor:

  • » IMPROVES ATHLETIC PERFORMANCE | May improve breathing which can produce physiological benefits leading to better physical endurance. Apply 30 minutes before starting and the strip will adhere better when you perspire
  • » WORKS INSTANTLY | Instantly & gently opens nasal passages to improve breathing and athletic performance
  • » RELIEVES NASAL CONGESTION | Opens your nasal passages so you can breathe through your nose, even when congested due to colds or allergies
  • » REDUCES SNORING | May reduce snoring by enhancing or improving nasal breathing, making it easier to sleep at night. Improvement may take 7-10 days. If after 10 days snoring has not improved, it may be a more serious condition and you should consult your physician
  • » COMFORTABLE AND EASY | 1. Clean skin, 2. Center nasal strip over bridge of nose, 3. Press and hold for 30 seconds

If reviewing a product, it may have been received free of charge. That will NEVER have a bearing on my recommendations.

Comments

Popular posts from this blog

Samsung FlipShot-ho hum

I just got the Samsung FlipShot aka SCH-U900. If you haven’t noticed by now, I am very family oriented, specifically focused on grandchildren. I frequently lament that I don’t have my camera on me. However, I always have my phone on me. Thusly I wanted a phone with a decent camera. The FlipShot comes close. Samsung claims it is a 3 megapixel camera with flash and zoom. The photos are not what I would consider decent from a digital camera but compared to my last phone/camera, they are much better. The phone has a slot for a micro sd memory card. I popped a 2gb card in there for saving my photos. I have not been able to find a way to default the photos to the memory card. You have to manually move them. I haven’t given up and perhaps in a software upgrade there will be a way to get them to the card without moving them manually. Getting them off of the phone is interesting. If you don’t buy Samsung’s charging/data cable, you can send them to yourself and get them on your pc that way. You ...

Troy-Bilt 2700 PSI 2.3 GPM Gas Pressure Washer Review

Troy-Bilt 2700 PSI 2.3 GPM Gas Pressure Washer Review Item #: 75140 | Model #: 20414 When I started this blog, I assumed I would be only talking tech. Well that led to philosophic musing and then comments on other stuff. I’m not sure where a pressure washer fits but regardless I am writing about it. I was power washing the mildew off the siding and thought the odor was the detergent I was using. When I looked over my shoulder and saw the grey smoke pouring out of the pressure washer, I realized what the odor really was. Considering the age of my venerable electric power washer, I concluded that discretion being the better part of safety and how water and electricity don’t play well, I trashed my old power washer. After much research, I found the Troy-Bilt 20414 was the best bang for the buck I could find. Keep in mind I am a consumer, not some testing house, so I make my purchases based on research and price point. I wanted electric but my boys who participated in the purchase, ...

3D Printing—Way, Way Cool

You may not be familiar with the term 3D printing but I bet you remember the replicator from Star Trek. Well kiddies, it is no longer just science fiction. Replication exists! Analog Science Fiction and Fact had a great article in the November 2008 edition called: “The 3D Train Wreck”. Thomas A. Easton, the author gave a great overview of the future of 3D printing. Simplistically, take your 3 dimensional CAD drawing and print it out on a laser printer that will print layers with some type of raw material. Each layer is adhered to the previous layer until you have a full three dimensional finished product. There are a variety of existing technologies that are doing this right now. Rapid-prototyping in industry is the biggest market right at the moment. Consider how incredibly convenient it would be to fabricate or replicate things right at home. My Polaris pool sweep needed a part yesterday. The part is unavailable, without the part the sweep doesn’t work. The alternative was to buy a...